DDR V1.10 ec2fae0c96 wesley.yao 22/11/15-10:58:09
S5P1
f967
rgef1
DDRConf2
DDR3, BW=16 Col=10 Bk=8 CS0 Row=14 CS=1 Die BW=16 Size=256MB
924MHz
DDR bin out

U-Boot SPL board init
U-Boot SPL 2017.09 (Aug 26 2024 - 15:47:36)
unrecognized JEDEC id bytes: ff, ef, aa
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 3
spl: mmc init failed with error: -123
Trying to boot from MTD1
ENVF: Primary 0x00000000 - 0x00040000
ENVF: OK
Trying fit image at 0x400 sector
## Verified-boot: 0
## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(491a6b22af...) + sha256(ea460dc6e5...) + OK
## Checking fdt 0x0025bf00 ... sha256(51bba657c3...) + OK
Total: 216.14 ms

Jumping to U-Boot(0x00200000)


U-Boot 2017.09 (Aug 26 2024 - 15:47:36 +0800)

Model: Rockchip RV1106 EVB Board
PreSerial: 2, raw, 0xff4c0000
DRAM:  256 MiB
Sysmem: init
Relocation Offset: 0fd85000
Relocation fdt: 0edfacf0 - 0edfedf0
CR: M/C/I
Using default environment

Bootdev(atags): mtd 1
ENVF: Primary 0x00000000 - 0x00040000
ENVF: OK
PartType: ENV
DM: v2
No misc partition
boot mode: None
FIT: no signed, no conf required
DTB: rk-kernel.dtb
HASH(c): OK
Model: Luckfox Pico Max
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 924000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  aclk_peri_root 400000 KHz
  hclK_peri_root 200000 KHz
  pclk_peri_root 100000 KHz
  aclk_bus_root 300000 KHz
  pclk_top_root 100000 KHz
  pclk_pmu_root 100000 KHz
  hclk_pmu_root 200000 KHz
Net:   eth0: ethernet@ffa80000
Hit key to stop autoboot('CTRL+C'):  0
## Booting FIT Image at 0xe90d4c0 with size 0x002ec800
Fdt Ramdisk skip relocation
No misc partition
## Loading kernel from FIT Image at 0e90d4c0 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x0e9168c0
     Data Size:    3027848 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x00008000
     Entry Point:  0x00008000
     Hash algo:    sha256
     Hash value:   f2989c4cae864b8d9df78b5174ca63b885ee6ace6c4cfdba148078b062588e5e
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 0e90d4c0 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x0e90dcc0
     Data Size:    35377 Bytes = 34.5 KiB
     Architecture: ARM
     Load Address: 0x00c00000
     Hash algo:    sha256
     Hash value:   1ecc913e4001db1e727108ee2221966a05ef68ad4aaa04acd3cf78edc68cfeb6
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x0e90d4c0 to 0x00c00000
   Booting using the fdt blob at 0x00c00000
   Loading Kernel Image from 0x0e9168c0 to 0x00008000 ... OK
   kernel loaded at 0x00008000, end = 0x002eb388
   Using Device Tree in place at 00c00000, end 00c0ba30
Adding bank: 0x00000000 - 0x10000000 (size: 0x10000000)
Total: 528.542 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.110 (root@018a1ffd64d4) (arm-rockchip830-linux-uclibcgnueabihf-gcc (crosstool-NG 1.24.0) 8.3.0, GNU ld (crosstool-NG 1.24.0) 2.32) #1 Mon Aug 26 14:09:19 HKT 2024
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c53c7d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Luckfox Pico Max
[    0.000000] Memory policy: Data cache writeback
[    0.000000] cma: Reserved 67584 KiB at 0x0be00000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.0
