大家好，我的开发板是Luckfox Pico Ultra W, Linux系统启动约10秒，连接wifi需要几秒，启动RTSP等导致客户端需要15秒的时间看到视频。如何缩短整个启动过程，有哪些有效的措施能够大幅缩短

使用附件的busybox后，reboot loader确实可以进入烧录模式。但是许多其他命令都无法使用了，例如telnet，ip等常用命令。

Yes, sleep works. No problem now.

您好，我的开发板是Luckfox Pico Ultra W，在/etc/init.d/S21appinit中需要执行ifconfig wlan0 up命令，而WI-FI驱动的加载耗时好几秒。为了在WIFI驱动加载后执行ifconig wlan0 up命令，我需要在起点脚本中添加延时。但sleep试过无效，sleep 10 但dmesg大约看仅仅0.1秒又继续执行了。怎样才能延时执行命令？

Hello,
Can I configure my Pico Ultra W's WIFI module as AP and STA at the same time?
It can serve as a AP for other device connect to and it connects to local wireless router with LAN IP address.

Luckfox Pico Ultra W
开发版在实验室很远，烧录时不方便按下【boot】，如何用软件命令远程实现进入烧录模式

Hi team,

I cannot enable PWM10_M1 function with luckfox-config on my Pico Ultra W board.
luckfox-config command reports "GPIO1_C6 and PWM10_M1 cannot be enabled at the same time" and quit.
But I do need to config the RV1106 pin83 as PWM function.
How can I fix this?

大家好，
哪里可以获取官方发布的最新镜像编译时所使用的defconfig文件？默认RTSP Server是关闭的，我开启遇到编译问题，所以想参考一下官方编译的defconfig

Luckfox pico max board with imx307 camera When runing rkaiq_3A_server and rkaiq_tool_server, it shows: [aiqtool][DumpMediaInfo]:#### isp: [aiqtool][DumpMediaInfo]: model_idx : 1 [aiqtool][DumpMediaInfo]: linked_sensor : 0 linked_sensor is 0, is this correct? [root@luckfox root]# rkaiq_tool_server -d...

Hi team, We found no isp iq file for imx307 on pico max board. So we did the ISP tuning process according the documents. BLC, LSC, AWB, CCM ... But when we put the iq file into /etc/iqfiles for imx307, the video become dark. Could you please tell me how can I get or generate the correct iq files for...