Hi, is it safe to power the Pico Zero through the 5V and GND pins?

I was able to power up the board using pins 2 and 6 and a 5V supply, but I'm not sure if this is recommended.
Also, if this is safe, what is the input voltage range to these pins?

Thanks!

Thank you. Is there no /etc/luckfox.cfg option or /etc/init.d/ file that can be easily changed so that it does not turn on after reboot?

I can modify the device tree if need be, but I rather use factory image, hence I thought adding it to `luckfox-config` could be good (which modifies device tree ...

When turning on the Pico Zero, I can hear two clicks coming from the camera. The first click occurs almost immediately after I plug in the power cable, and the second click is a few seconds after. I've found that the first click corresponds to the filter being activated, and the second click comes ...

Hi, I recently received my Pico Zero and IMX415 IR Cut camera module and was able to try out the RTSP stream via VLC. However, the resulting image is reddish. I believe this is due to the IR filter not being switched on? I've been looking at the file in /etc/oem/usr/share/rkipc-800w.ini, but I'm ...