sudo upgrade_tool uf update.img
[sudo] password for sensen:
Loading firmware...
Support Type:1106 FW Ver:0.0.00 FW Time:2024-07-10 18:40:34
Loader ver:1.01 Loader Time:2024-07-10 18:39:54
Start to upgrade firmware...
Test Device Start
Test Device Success
Check Chip Start
Check Chip Success
Get FlashInfo Start
Get FlashInfo Success
Prepare IDB Start
Prepare IDB Success
Download IDB Start
Download IDB Success
Download Firmware Start
Download Firmware Fail
Note:Definition of partition in the firmware is larger than flash
these error are occured
In SPI nand flash the firmware loading are failed
Hello, based on the information you provided, it seems that the firmware size exceeds the flash size. You need to adjust the partition sizes in the board support files and then re-run ./build.sh to package the firmware.