I've read that the RV1103 supports and ISP up to 4M pixel and the SC3336 has 3M. Are there any other CSI compatible camera from the same family. I'd like to have more resolution and the default buildroot functionality (streaming rtsp) working more or less out of the box.
Thanks
CSI camera compatible
Hello
Unfortunately, for the RV1103 we currently only use the SC3336
Unfortunately, for the RV1103 we currently only use the SC3336
is not unfortunately is a shity "fox" move
OV2640 and alike, IMXxxx is very common and already in our part bin and could be present in kernel or at least some gihub customisation file for those who want to use it and not your one and only SC3336.
Il pass badluck fox board for this reason even i like and need.
OV2640 and alike, IMXxxx is very common and already in our part bin and could be present in kernel or at least some gihub customisation file for those who want to use it and not your one and only SC3336.
Il pass badluck fox board for this reason even i like and need.
We also hope to see Luckfox Pico support more camera modules.
However, for a camera to function properly, it's not enough to have just driver support — ISP calibration is also required.
If the issue is related to the camera device tree configuration or driver problems, we've already provided solutions in our past GitHub posts and forum discussions.
But when it comes to ISP calibration, we are unable to assist. It requires specialized ISP engineers and Rockchip-authorized software to perform the calibration.
Without ISP calibration, images captured from the camera cannot be properly processed or used.
Rockchip does provide default support for a number of sensors, so on the RV1103 platform, we have only adapted the SC3336 sensor that we have in stock.
In theory, the sensors mentioned in $SDK/media/isp/release_camera_engine_rkaiq_rv1106_arm-rockchip830-linux-uclibcgnueabihf/isp_iqfiles could also be used, but since we haven't tested them, we cannot officially list them as supported for Luckfox Pico.
However, for a camera to function properly, it's not enough to have just driver support — ISP calibration is also required.
If the issue is related to the camera device tree configuration or driver problems, we've already provided solutions in our past GitHub posts and forum discussions.
But when it comes to ISP calibration, we are unable to assist. It requires specialized ISP engineers and Rockchip-authorized software to perform the calibration.
Without ISP calibration, images captured from the camera cannot be properly processed or used.
Rockchip does provide default support for a number of sensors, so on the RV1103 platform, we have only adapted the SC3336 sensor that we have in stock.
In theory, the sensors mentioned in $SDK/media/isp/release_camera_engine_rkaiq_rv1106_arm-rockchip830-linux-uclibcgnueabihf/isp_iqfiles could also be used, but since we haven't tested them, we cannot officially list them as supported for Luckfox Pico.