使用luckfox-pico-rv1106 -max开发板，将ar0230相机连接在VI_CIF_M1，需要修改哪些文件，如何修改

• zhbrain

  Posts: 3

  Joined: 2025-06-03 8:06

  2025-06-14 6:13

  我修改了：1、我在rk1106-luckfox-pico-pro-max-ipc.dtsi文件中添加：
  ar0134: ar0134@20 {
  compatible = "aptina,ar0134";
  status = "okay";
  reg = <0x20>;
  clocks=<&cru CLK_CIF_OUT>; 报错！报错！
  clock-names = "xvclk";
  //avdd-supply=<&vcc_avdd>;
  //dovdd-supply=<&vcc_dovdd>;
  dvdd-supply=<&vcc_dvdd>; 报错！报错！
  power-domains=<&power RV1126_PD_VI>; 报错！报错！
  //pwdn-gpios = <&gpio2_RK_PA4 GPIO_ACTIVE_HIGH>;
  //reset-gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&cifm1_dvp_ctl>; 报错！报错！提示没有cifm1_dvp_ctl
  rockchip,camera-module-index = <0>;
  rockchip,camera-module-facing = "back";
  rockchip,camera-module-name = "CMK-OT2115-PC1";
  rockchip,camera-module-lens-name = "30IRC-F16";
  2、我在kernel menuconfig中配置：
  1）添加ar0230摄像头模块
  2）禁止rkchip_rgb_graphic //这部分占用vi_cif_m1资源

  • Quote