RV1106 wifi 模块 AIC88000 加载问题

• 666大军

  Posts: 7

  Joined: 2026-01-08 1:24

  2026-01-19 3:23

  我加载WIFI模块成功后，
  用 wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf -D nl80211
  输出日志后
  nl80211: use P2P_DEVICE support
  nl80211: interface wlan0 in phy phy1
  nl80211: Set mode ifindex 3 iftype 2 (STATION)
  nl80211: Subscribe to mgmt frames with non-AP handle 0x90bf8
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=06
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=0a07
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=0a11
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=1101
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=1102
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=0505
  nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x90bf8 match=0500
  rfkill: Cannot open RFKILL control device
  nl80211: RFKILL status not available
  netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
  Add interface wlan0 to a new radio phy1
  nl80211: Regulatory information - country=00
  这里会有一个 RFKILL ，这个是什么来的

  • Quote