Bring-up MIS5001 camera into luckfox pico plus rv1103

• minhnv

  Posts: 2

  Joined: 2025-11-26 9:40

  2026-03-18 15:29

  Hello,
  I am trying to bringup MIS5001 camera into Luckfox Pico Plus RV1103.
  I added device tree node of MIS5001 in file: luckfox-pico/sysdrv/source/kernel/arch/arm/boot/dts/rv1103-luckfox-pico-ipc.dtsi
  But I cannot use this camera. I read that MIS5001 not avaiable for rv1103. But is there any way I can use MIS5001 for luckfox pico plus rv1103 ? Please help me, thank you.

  Code: Select all

  mis5001: mis5001@31 {
  		compatible = "imagedesign,mis5001";
  		status = "okay";
  		reg = <0x31>;
  		clocks = <&cru MCLK_REF_MIPI0>;
  		clock-names = "xvclk";
  		reset-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
  		pinctrl-names = "default";
  		pinctrl-0 = <&mipi_refclk_out0>;
  		rockchip,camera-module-index = <0>;
  		rockchip,camera-module-facing = "back";
  		rockchip,camera-module-name = "CMK-OT2115-PC1";
  		rockchip,camera-module-lens-name = "30IRC-F16";
  		port {
  			mis5001_out: endpoint {
  				remote-endpoint = <&csi_dphy_input1>;
  				data-lanes = <1 2>;
  			};
  		};
  	};

  this is log:

  Code: Select all

  [    2.228162] mis5001 4-0031: driver version: 00.01.02
  [    2.228283] mis5001 4-0031: Failed to get pwdn-gpios
  [    2.228298] mis5001 4-0031: could not get default pinstate
  [    2.228307] mis5001 4-0031: could not get sleep pinstate
  [    2.228335] mis5001 4-0031: supply avdd not found, using dummy regulator
  [    2.228580] mis5001 4-0031: supply dovdd not found, using dummy regulator
  [    2.228654] mis5001 4-0031: supply dvdd not found, using dummy regulator
  [    2.239409] mis5001 4-0031: Detected mis4001 1311 sensor
  

  • Quote