Luckfox Forums

我使用官网提供的SDK升级之后网口未能正常获取到IP地址是为什么呢? 另外网线连上之后 连灯也不亮
# ifconfig
eth0 Link encap:Ethernet HWaddr 12:80:EE:B4:CA:27
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:158 errors:0 dropped:0 overruns:0 frame:0
TX packets:650 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17802 (17.3 KiB) TX bytes:222300 (217.0 KiB)
Interrupt:52

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1283 errors:0 dropped:0 overruns:0 frame:0
TX packets:1283 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:98140 (95.8 KiB) TX bytes:98140 (95.8 KiB)

usb0 Link encap:Ethernet HWaddr 5A:12:AC:FD:BD:6D
inet addr:172.32.0.93 Bcast:172.32.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:81 errors:0 dropped:43 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6942 (6.7 KiB) TX bytes:8043 (7.8 KiB)

试一下，注意电脑在网络连接那里设置自动获取IP，不然会一直循环广播

Crocodile wrote: ↑2024-02-06 3:14

Code: Select all

udhcpc -i eth0

试一下，注意电脑在网络连接那里设置自动获取IP，不然会一直循环广播

能使用静态IP吗？

网口没有指示灯。一般路由器分配的都是动态IP地址，如果想设置成静态IP，参考：
https://wiki.luckfox.com/zh/Luckfox-Pic ... -Autostart

问题已经解决,多谢各位的指导！