Luckfox Forums

Hi team,

I cannot enable PWM10_M1 function with luckfox-config on my Pico Ultra W board.
luckfox-config command reports "GPIO1_C6 and PWM10_M1 cannot be enabled at the same time" and quit.
But I do need to config the RV1106 pin83 as PWM function.
How can I fix this?

The GPO1_C6 pin has been designated for RGB functionality and cannot be used simultaneously as a PWM10 output. Execute the luckbox config command to disable the RGB enable configuration and configure PWM10.