Rk3308 sdk 单独编译的各个部分下载到板子里后找不到wlan，只有eth0

• AINAjfn

  Posts: 1

  Joined: 2025-07-11 6:35

  2025-07-11 6:40

  eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  inet 192.168.0.200 netmask 255.255.254.0 broadcast 192.168.1.255
  inet6 240e:3b6:4a3:5cb0:5536:8039:aa54:8a79 prefixlen 64 scopeid 0x0<global>
  inet6 fe80::a2b9:a244:9cf6:2769 prefixlen 64 scopeid 0x20<link>
  inet6 240e:3b6:4a3:5cb03762:ff8a:1b5c prefixlen 64 scopeid 0x0<global>
  ether 9e:1d:0e:f5:4d:d2 txqueuelen 1000 (Ethernet)
  RX packets 2458 bytes 258136 (258.1 KB)
  RX errors 0 dropped 566 overruns 0 frame 0
  TX packets 1615 bytes 172847 (172.8 KB)
  TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  device interrupt 38
  
  lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  inet 127.0.0.1 netmask 255.0.0.0
  inet6 ::1 prefixlen 128 scopeid 0x10<host>
  loop txqueuelen 1000 (Local Loopback)
  RX packets 148 bytes 19295 (19.2 KB)
  RX errors 0 dropped 0 overruns 0 frame 0
  TX packets 148 bytes 19295 (19.2 KB)
  TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

  • Quote