Page 1 of 1

RV1106G3的DDR容量识别不准问题

Posted: 2026-05-15 4:45
by chenwanan1

luckfox login: DDR 306b9977f5 wesley.yao 23/12/21-09:28:37,fwver: v1.15
S5P1
4x
f947
rgef1
DDRConf2
DDR3, BW=16 Col=10 Bk=8 CS0 Row=13 CS=1 Size=128MB
924MHz
DDR bin out

U-Boot SPL board init
U-Boot SPL 2017.09 (Jun 26 2025 - 11:32:49)
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 2
MMC: no card present
mmc_init: -123, time 2
spl: mmc init failed with error: -123
Trying to boot from MTD1
ENVF: Primary 0x00000000 - 0x00040000
No misc partition
Trying fit image at 0x400 sector
## Verified-boot: 0
## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(0c304a6500...) + sha256(7abe8623a9...) + OK
## Checking fdt 0x00261170 ... sha256(9f596c5683...) + OK
Total: 123.184/204.449 ms
以上是上电时打印的日志,烧录的时官方固件。我芯片型号的是RV1106G3,板子是max版本。


Re: RV1106G3的DDR容量识别不准问题

Posted: 2026-05-16 3:34
by Crocodile

看一下芯片的丝印是不是RV1106G3,

image.png

, 正常RV1106G3加载DDR.bin 识别到的容量大小应该为 256MB, RV1106G2 对应的DDR大小才是 128MB


Re: RV1106G3的DDR容量识别不准问题

Posted: 2026-05-16 3:39
by chenwanan1

芯片丝印确定是RV1106G3


Re: RV1106G3的DDR容量识别不准问题

Posted: 2026-05-16 3:43
by Crocodile

请直接咨询购买的商家进行退货换货,RV1106G3是内封的DDR,ddr.bin 加载后只识别到128MB 是芯片内部的问题