Just a side note to this: In my own builds (OpenWrt, not the standard image) for Luckfox targets, the kernel is built with CONFIG_OF_OVERLAY enabled, and there's the dtbocfg driver (https://github.com/ikwzm/dtbocfg) which allows loading device tree overlays, effectively modifying the device tree, at ...

Hi Smart86 box users,

I am working to bring OpenWrt to the rv1106 (based on @pengphei's work on OpenWrt , on my own fork at github . My ultimate goal is to bring my home automation platform P44-xx-open to rv1106 targets.

As an intermediate result, there's now a set of (env, boot, rootfs) free ...

Thank you, albeit a bit late, for hinting at the right point in the wiki!

For my own use, to be able to design hardware extensions for the Pico Pi and the Smart Box 86, I combined some of the information from all those sources into one excel sheet with some color highlights, so I can sort by pin ...

Hi, thanks for the reply. Now I understand why it works in the standard setup - I only looked at the dts and was not aware of the insmod_goodix.sh script that is in the SDK (IMHO, a bit of a hack ;) ). In the openwrt build I'm working with these days, there is no such late-loading script, but just ...

Hi, I am debugging a problem with the 86panel, where the touch input only works sometimes, but sometimes not. I found the following:

The goodix touchscreen is configured at i2c address 0x14 in the dts ( sysdrv/source/kernel/arch/arm/boot/dts/rv1106-luckfox-pico-86panel-ipc.dtsi in the SDK, lines ...

Thank you for the explanation! So I would need to have my own number block and OUI in case I need public unique MAC addresses on ethernet? Is it the same for WiFi and BT?

Hi,

I am working to port OpenWrt to Luckfox rv1106 devices (right now focusing on the 86 panel), based on ticklab's base work .

It's already running fine with display, RS485 and wired network. However, at this time it is unclear to me where the MAC address for the ethernet interface comes from. I ...

Thank you very much for these images! That helps a lot for thinking about different extensions than RS485 and relay.

I only wonder which RV1106 pins are actually connected. The UART seems to be UART4, so it would be GPIO1_B0/GPIO1_B1 or GPIO1_C4/GPIO1_C5.

The relays are accessible from Linux as ...

Hello, I was excited to learn about the Smart 86 Box, and now have one here to work with. Really nice product! Already got my OpenWrt based home automation with matter running on it. However to really make use of the hardware I'd need more documentation, such as pinout of the 14pin connector between ...