Linux upgrade tool error: Erase IDB Fail

• hpsaturn

  Posts: 2

  Joined: 2025-08-04 10:01

  2025-08-04 11:13

  Hi, I want to erase my Luckfox Lyra on Linux without any previous step with Windows tools, but I have the next error when I perform the erase directive, like this:
  

  Code: Select all

   sudo tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/upgrade_tool ef output/firmware/MiniLoaderAll.bin

  The upgrade_tool output show:

  Code: Select all

  Using /storage/pico/luckfox/luckfox-sdk-250623/tools/linux/Linux_Upgrade_Tool/Linux_Upgrade_Tool/config.ini
  Loading loader...
  Start to erase flash...
  Download Boot Start
  Download Boot Success
  Wait For Maskrom Start
  Wait For Maskrom Success
  Test Device Start
  Test Device Success
  Get FlashInfo Start
  Get FlashInfo Success
  Prepare IDB Start
  Prepare IDB Success
  Erase IDB Start
  Erase IDB Fail
  

  At the same time the UART console output show:
  

  Code: Select all

  DDR 0ac6b06a19 typ 24/11/13-17:22:48,fwver: v1.04
  tREFI:4x, sr_idle:93, pd_idle:13
  PHY drv:clk:60,ca:160,DQ:80,odt:480
  vrefinner:50%, vrefout:50%
  dram drv:40,odt:0
  sr_dq:0, sr_ca:0, sr_clk:0
  rg:0x29-0x0-0x2, 0x1c-0x0-0x2,status:a007
  rdtrn:0x12-0x2a-0x43(0x31)
  wrtrn:0xa-0x24-0x3f(0x35)
  DDR3, 750MHz
  BW=16 Col=10 Bk=8 CS0 Row=13 CS=1 Size=128MB
  out
  Boot1 Release Time: Nov  5 2024 17:09:59, version: 1.02 NO FTL
  rom_version: 0x30303156
  chip_id:524b350600,0
  ChipType = 33
  sfc nor id: ff ef aa
  sfc_nand id: ef aa 22
  sfc_nand_density 80000
  sfc_nand_density 7fc00
  UsbBoot ...3930
  powerOn 658298
  sfc_nand_check_bad_block page= 1ff00 ret= 0 spare= 0
  e: 7fc00 is bad block skip0
  sfc_nand_check_bad_block page= 1ff40 ret= 0 spare= 0
  e: 7fd00 is bad block skip0
  

  And of course, I have issues trying to flash a new fresh build image using your SDK or buildroot environment. The rkflash.sh tool believes that the target is the internal flash, and fails for partition size:
  

  Code: Select all

  Download Image... (1%)
  Download Firmware Fail
  Note:Image is larger than partition size in the firmware
  

  Note: The complete process flashing the SPI_NAND version, I mean, using only internal flash, works fine. I don't have any problem. The Linux tools works ok for these options of build lunch selections: 0,1,0.
  
  My environment details:
  
  SDK: luckfox-sdk-250623
  OS: Debian GNU/Linux 11 (bullseye)

  • Quote