Luckfox Forums

Hello - I have the Core3576 board with 0GB eMMC. I am trying to boot Debian 12 from micro sd card.

The are only two option for images, so I chose the one without eMMC named Luckfox-RK3576-Debian12-xfce-7inch-touch-a-250219.img

I burned the image using the SDDiskTool described in the wiki.

Display is connected to standard display via HDMI.

But I am stuck at this screen: https://imgur.com/a/18swO1u
It just says "Luckfox kernel" but does not move past it.

What do I need to do to get the system to boot correctly? Did I use the correct image?

Thanks.

You can re - download the image from the network disk and burn it to the TF card. When the development board starts successfully, externally, the ACT light will flash. If the ACT light doesn't flash, it means the system failed to start. Try replacing the TF card and test again.