Hello,
To manually configure your wired interface, you would edit the "/etc/network/interfaces" file and add the appropriate configuration for your wired interface. Here are the steps to follow:
1. Open the network interface configuration file:
2. Within the file, append the following content for your wired interface (eth0):
Code: Select all
auto eth0
iface eth0 inet dhcp
hwaddress ether 1a:cf:50:33:5f:92
Please note that the "hwaddress" line specifies the MAC address of your Ethernet card; replace it with the actual MAC address of your device.
3. After saving the changes, restart the system.